Ferrous scrap
E1 / HMS 2 - Old thin scrap
Material from demolition work and industry, used and unserviceable goods.
Most of scrap exceed 1 mm thickness and is less than 3 mm thick
Maximum dimensions: 1.50 x 0.50 x 0.50 m
E2 New thick scrap
Waste material from production processes which is collected in as-new condition. Material from overproduction.
At least 3 mm thick
Maximum dimensions: 1.50 x 0.50 x 0.50 m
E2 New plate cuttings – NHPS / Oxycupage
New waste material from production processes which is collected in as-new condition. Material from overproduction.
At least 3 mm thick
Maximum dimensions: 1.50 x 0.50 x 0.50 m
E2 New plate cuttings – NHPS / Oxycupage (Oversize)
New waste material from production processes which is collected in as-new condition. Material from overproduction.
Can be used for reroling / burning
At least 3 mm thick
Dimensions: upto about 3.00 x 0.70 x 0.70 m
Cut Rails for remelting
Normally in n6,5 meter length of origin
Can be cut according to each customer needs (20 cm – 150 cm)
Railroad track plates
Comming from demolution of rail ways
Used rails suitable for rerolling
Length up to 12,5 meters. Packed in bundles.
3A Old thick scrap (Russian / Kazakhstan origin)
Material from demolition work and industry, used and unserviceable goods
Most of scrap exceed 3 mm thickness
Maximum dimensions: 1.50 x 0.50 x 0.50 m
E3 Old thick scrap
Material from demolition work and industry, used and unserviceable goods, might incl. concrete steel, mecanical parts, galvanized scrap.
At least 6 mm thick
Maximum dimensions: 1.50 x 0.50 x 0.50 m
E3 / Bonus scrap
Material from demolition work and industry, used and unserviceable goods
Over 6 mm thick
Maximum dimensions: 1.50 x 0.50 x 0.50 m
E5 Steel turnings
Homogeneous or mixed lots of carbon steel turnings, free from excessive amount of bushy turnings. The turnings must be free from all contaminants such as non-ferrous metals, scale, grinding dust and heavily oxidized turnings or substances from the chemical industry.
Free from turnings from castings and automatic lathes etc.
S5 Cast Iron Borings
Homogeneous or mixed lots of cast iron turnings and borings.
Cast Iron
Industrial and houshold cast iron
E6 / DDQ Bales Bales - Deep-drawing quality
New thin steel scrap, less than 3 mm thick, compacted or in the form of bales.
Analyse: Low P
E8 New thin scrap
New thin steel scrap except rolled/bound strips
Maximum dimensions: 1.50 x 0.50 x 0.50 m
Cooling pellets
Deep-drawing quality, bulk density at least 2.3 tones / m3,
spherical pellets, dust-free and dry,
Dimensions: between 20 and 50 mm in diameter
E40 Shredded scrap
Old steel scrap fragmentized into pieces not exceeding 200 mm in any direction for 95% of the load.
Free from incineration scrap, bulk density at least 0.9 t/m3
Metallic ferrous content at least: 92%
E46 Incinerator Scrap
Shredded or by similar methods from recycled steel scrap waste incineration
Bulk density (dry weight). at least 0.9 t / m 3
Grain size: 50-70 mm ceiling
max. 5 wt -% <5 mm
Metallic Fe content: at least 92%
Moisture: to separate agreement
E71 Tin can scrap
At least 93% of steel packaging, while others for the same recovery appropriate Fe's shares are up against the quota of 93% to 5% counted, not mixed with scrap steel from waste incineration, largely free from admixture of other packages with the exception packaging made of sheet steel.
To tinplate packaging including their (proper) components.
Bulk density on car or truck: least 0.25 t/m3
 |
Click if you want to buy |
